5 Reasons Why Your St. Clair County, MI Well Water Pump Won’t Stop Running

5 Reasons Why Your St. Clair County, MI Well Water Pump Won't Stop RunningA continuously running pump indicates trouble. It is a sign that energy and water are continually going to waste in your house. More importantly, a continuously running pump also means that water is running in your house continuously. This, in turn, means that your home is being constantly subjected to damaging external factors.

A continuously running water pump is one of the biggest grievances among St, Clair County, MI, homeowners. Fortunately, this is a problem with solutions. However, to be able to solve the problem, you must first understand what is causing it. Here are some of the possible reasons why your pump won’t stop running.

You Are Dealing with a Malfunctioning Valve

If your pump won’t stop, chances are the pressure gauge has switched itself into the malfunctioning mode. In this mode, the pump does not know when to stop or switch itself off. Fortunately, an expert will take only a few minutes to mend this problem.

Your Pump Has Aged

One of the reasons why your pump won’t stop could simply be that your pump has gotten too old. Like everything else in your home, your water well’s pump has a specific amount of life. Once the pump crosses its life span, its working will automatically deteriorate. Thus, if you haven’t changed your pump in years, an aged pump could be the culprit.

A Leaking Plumbing System Is the Real Culprit

One of the most common reasons for continuously running pumps is a leaking plumbing system. When this reason is the prime culprit, you must immediately call a plumbing expert. Checking your home’s plumbing is no easy task. The plumbing expert will check the entire plumbing system to understand the problem and figure out a solution.

There Is Some Problem with Your Pressure Control Valve

Yet another reason why your pump is not working properly may be that the pressure control has not been set properly. Similarly, if the contact points on the pressure control are burned or if the tubes are blocked, the pump will keep running continuously. This is a tricky solution that only an expert can solve. Do not try and make a DIY job out of this or the problem can even get worse.

Your Submersible Pump Has Become Damaged

A submersible pump does the important task of pulling water and putting this water into the pressure tank located at the bottom of the well. When the submersible pump becomes damaged due to a puncture or hole, it becomes difficult for the pump to stop running. In most cases, this damage is due to corrosion. In any case, this is again a problem that can be easily solved. All you need is an expert you can trust.

Key Takeaway

A pump that won’t stop is a problem that many St. Clair County, MI, homeowners experience. The good news is it’s a problem that can be easily solved. However, to be able to fix a continuously running pump, you will have to figure out what is causing the problem and for this, you will need an expert.

Give Ries Well Drilling Inc a call to answer any questions you may have about well water drilling, well water maintenance, or anything well water-related.  We can be reached at (586) 784-9516!

We provide Water Well Drilling Services in the following Michigan Counties: