4 Things to Check After a Water Well Construction in Macomb County
After the work needed to install your water well is finished, you’ll want to make sure that everything was done according to the right standards. But how will you know if that is indeed the case? After all, not everyone is an expert in this field.
To help future well owners ensure that their expectations are met, we’ve put together this guide on what to check after the well has been constructed. This checklist will give you the information you need to confirm the quality of the contractor’s work.
Depth of the Water Well
The actual depth of the water well is important to know when it comes to selecting the right equipment to use with the system. This measurement is used for determining the kind of pump to use, the amount of water available, etc.
You can inspect the depth by using a weight tied to a string. Simply lower it down until you feel the weight hit the bottom, then mark the portion of the string at ground level and the portion where it is wet. The length from the end of the weight to the ground level is the well’s depth, while the length from ground level to where the string gets wet is the normal water level. You can then compare the values you have with the well’s construction report.
How Much Water is Available for Use
While it’s almost impossible to suddenly deplete the water inside the well, you still need to know how much water you can extract from it at any given time. The contractor should have tested the well’s yield, usually measured in gallons per minute, the change in water level during use, and how long it took for the water to return to normal levels.
This will give you an idea if the system is adequately set for the capacity of the well to provide water and the actual amount of water you will be using.
Cleanliness of the Water Well System
Since it will likely be used for drinking water, a well must always be clean. The well cap is the most exposed part of the system so it’s the point where extra care must be taken to make sure that contamination will be avoided. The cap must be installed and closed securely to avoid any insect, rodents or other critters from infesting the pipes.
Next, ask the well drilling contractor about the details of the disinfection and filtration of the well. Again, you want to make sure that any harmful contaminants don’t get into the water you’ll be drinking.
The Water Well’s Construction Record
This is one of the most important documents that the contractor is required to provide. It should have all the important details regarding the specifics of your new water well. The information in the document can help you determine if the well was built according to your area’s local standards and regulations.
I Want The Best Water Well Construction Company in Macomb County, Michigan!
If you want to find a water well construction contractor that will tick all the boxes of this checklist, get in touch with Ries Well Drilling. We’re a family-owned water well construction company that provides well services for agricultural, residential, and commercial needs. Give us a call today 586-784-9516.
We provide Water Well Drilling Services in the following Michigan Counties: